Linksys Usb 2.0 Driver For Linksys
ADM8511 Pegasus II Ethernet, full-speed, idVendor=07a6, idProduct=8511: Works out of the box. One of the few available USB 3.0-based Ethernet adapters, the Linksys USB3GIGV1, is only supported officially on Windows and Mac devices. Linux driver for Linksys USB3GIGV1 (based on Realtek RTL8153) This repository features a Linux driver for Linksys USB3GIGV1 USB 3.0 Ethernet adapters, which are based on Realteks RTL8153.
Resolving problems with a wireless adapter that cannot be detected by Windows computer. Overcoming program compatibility issue in Windows 7. Wake on LAN feature and settings. Forcing a network adapter to 10 Mbps Half Duplex. USB Icon and Ports The USB Icon (below) generally indicates where a USB port is located on a desktop or notebook computer.Manually installing the Linksys adapter.
No external power source needed.Gigabit USB Network Adapter from Linksys allows you to instantly connect to a network from a USB-enabled. FRITZ!Box WLAN 3030 USB Ethernet Adapter: Works out of the box. PCs USB port and your PC will automatically download the driver from the Microsoft.
Easy to follow instructions on how to download the kernel source code and symbol files can be found in the 2nd posting here, including how to compile the module. NOTE: Until Raspbian 3.8.y kernel did not include a driver for this hardware, you must have to build a new kernel module from the source code provided by ASIX here. USB 3.0 to Gigabit Ethernet Adapter (ASIX AX88179) USB Ethernet Adapter. No external power source needed. USB 2.0 to Fast Ethernet Adapter (ASIX AX88772B) USB Ethernet Adapter: As distributed with Zenbook Ultrabooks.
(idVendor=0b95, idProduct=772b) Does not work without powered USB hub. USB 2.0 UA0144: AX88772 chipset using the asix kernel driver. Probably needs more than 100 mA current. USB 2.0 LanCard Model: LAU-15 (CK0049C) using the mcs7830 driver.
USB register states that it draws max. Doing OK using Apple USB charger and Pi's own USB port. Works out of the box (driver present since kernel 2.6.32). Apple USB Ethernet Adapter using asix kernel driver. If you get a model without the Logilink logo and the model number JP1082 it's a fake. This only supports USB1.1 and isn't well support under Linux.
D-Link DUB-E100 Fast Ethernet USB 2.0 Adapter - works out of the box, requires own power supply (from powered USB hub) Needs its own power source. Edimax EU-4230 USB2.0 Fast Ethernet Adapter with 3 port USB hub. Edimax EU-4208 USB2.0 Fast Ethernet Adapter (idVendor=0b95, idProduct=772b) - works out of the box, requires own power supply (from powered USB hub) No powered USB hub needed, tested on Raspberry Pi A+ Works out of the box without any setup.
Pluscom U1EC - Davicom DM9000E chipset, DM9601 driver, Max current 144mA. Faster than the built-in adapter, connects at gigabit rate though iperf tests show about 150 - 175 Mbit speed. Works very well on a Raspberry Pi 2 running Raspbian. Linksys - USB3GIG v1 (Vendor ID: 13b1, Product ID: 0041) - USB 3.0 gigabit adapter, obviously connecting in USB 2.0 mode. Linksys - USB300M - Compact USB 2.0 10/100 Network Adapter - Recognized automatically, didn't require powered hub when powering pi using microUSB supply rated for 0.7A output. I had it plugged into a powered hub so I cannot say if it works connected directly to the pi.
SMB test show approx 150mpbs. Works well on a Raspberry Pi 2 running OSMC Release Candidate. Trendnet TU3-ETG Gigabit USB 3.0 Adapter works out of the box. Trendnet TU2-ET100 Adapter works out of the box. Doesn't seem to require any extra power supply. Sitecom LN-030 V2 detected as ASIX AX88772 USB 2.0 Ethernet Adapter works out of the box.
Works out of the box on Debian Wheezy/sid (-wheezy-armel)(not tested yet on other OS). Hama 00049244 Fast Ethernet USB 2.0-Adapter detected as MOSCHIP 7830/7832/7730 usb-NET adapter. Reboot and you should have a fully working Ethernet adapter.The adapter seems to work without a powered USB hub, but according to the specifications it can draw up to 190 mA, so there might be stability issues if additional power is not provided. Unfortunately you will have to compile the kernel (even if you don't actually install it) - which will take the better part of the day on the Raspberry, but once that's done you can unpack the driver source and just run "make & sudo make install". >:-( Fortunately there is a very useful guide for how to get the sources from github, and preparing that source so that you can compile modules. The hardest part was in fact getting the Linux source code required, because the repositores contained the source for the wrong kernel version.
Axago ADE-X1 10/100 Ethernet Adapter (USB: 9710:7830 driver:mcs7830). Works without a powered hub or when plugged into an unpowered hub on a Model "A" Pi. Detected as ASIX AX88772, asix driver, Max current 250mA. Works out of the box on Raspbian. Newlink NLUSB2-ETH USB 2.0 Ethernet Adapter.
With last kernel there is no problem and adapter working fine. Dmesg error: NETDEV WATCHDOG: eth1 (MOSCHIP usb-ethernet driver): transmit queue 0 timed out. Tested with and without powered USB hub. Needed to unplug and plug USB again. With older kernels adapter working about 10 minutes without problem, but after that kernel write error message to dmesg and no packet is received.
Plugable USB2-E100 USB 2.0 10/100 ethernet adapter works out of the box (ASIX AX88772 chipset). lsusb output: Bus 001 Device 005: ID 0b95:772b ASIX Electronics Corp. Works out of box very stable with asix kernel driver on latest raspbian 3.6.11+ (nov 2013), Raspberry Pi model B, 256MB RAM, connected through powered USB hub (may works without it, not tested).
Kontron DM9601 (USB: 0fe6:9700) Cost $5 on Ebay, works OK with Dell laptop under WinXP & Debian. Pi is powered by a 2.5 amp power supply. No external power source or USB hub needed. Works out of box on Raspbian Wheezy on a Pi 2 Model B. TP-Link UE300 USB 3.0 to Gigabit Ethernet Network Adapter.
TP1-TP2 voltage measured solid at 4.92 V. Adaptor works on boot on R-Pi model A well enough for ping and NTP, but then crashes with "Kernel Bug at net/core/skbuff.c:127" immediately when file transfer begins. Check with lsusb -v, field bcdUSB.
It looks like many of these are sold through eBay. 2016 UPDATE: the driver has been fixed! As a workaround, doubling the socket buffer size will prevent the kernel oops:Markings on the outside of a couple of these adapters were: "USB2.0 to Fast Ethernet Adapter Model No:KY-RD9700".
0 kommentar(er)
